Basic Parameters
|
Vacuum Oven |
Item Reference |
Specification Requirements (To be filled in by the requesting party based on their specific needs) |
|
|
Product Requirements |
1.01 |
Product Dimensions (L×W×H) |
Min 50×50mm Max 340×870mm |
|
1.02 |
UPH Requirement |
10 PCS / 10 min |
|
|
1.03 |
What is the PCB thickness range? |
4–10 mm (carrier thickness) |
|
|
Equipment Basic Information |
2.01 |
Equipment Dimensions |
1150×2000×1850 mm |
|
2.02 |
Equipment Weight |
1000 KG |
|
|
2.03 |
Input voltage, current requirements, and equipment power? |
AC380 50HZ 13KW |
|
|
2.04 |
Vacuum reflow oven capacity? |
Can hold up to 10 PCS in stacked layers |
|
|
2.05 |
Is vacuum evacuation required? |
Yes |
|
|
2.06 |
Programmable PID temperature controller with segment programming capability |
Multi-segment temperature zones |
|
|
Vacuum Oven |
Item Reference |
Specification Requirements (To be filled in by the requesting party based on their specific needs) |
|
|
Equipment Performance |
3.01 |
Supports vacuum process requirements |
Vacuum level control range: 0.1~100 torr (1 atm = 760 torr) |
|
3.02 |
Supports pressure control requirements |
Pressure control range: 0~8 kg/cm² ±0.1 |
|
|
3.03 |
Supports rapid cooling requirements |
>5°C/min |
|
|
3.04 |
Actual temperature monitoring inside the chamber |
Radiant hot air circulation |
|
|
3.05 |
Temperature deviation within the baking chamber (top/bottom/left/right)? (±2°C) |
±2°C (unaffected by the number of PCBs) |
|
|
3.06 |
Temperature setting range? |
RT–250°C |
|
|
3.07 |
Chamber load capacity |
60 Kg per layer |
|
|
3.08 |
Oven outer wall temperature requirement during operation? |
Outer wall must maintain a constant temperature |
|
|
3.09 |
Is the oven body material sturdy and the door sealing surface flat? |
Yes |
|
|
Vacuum Oven |
Item Reference |
Specification Requirements (To be filled in by the requesting party based on their specific needs) |
|
|
Equipment Software |
4.01 |
User-friendly software interface: Chinese language, simple operation, with hierarchical password control for software access |
Yes |
|
4.02 |
Equipment compatibility and upgrade capability |
Can be modified as per customer requirements |
|
|
Safety Requirements |
5.01 |
Complies with national standards (Industrial automation product safety requirements) |
Yes |
|
5.02 |
Over-temperature alarm and power cutoff protection? |
Yes |
|
|
5.03 |
Leakage protection function |
Yes |
|
|
5.04 |
Fool-proof alarm function: stops operation and displays alarm message when protective cover is opened or emergency stop button is pressed |
Yes |
|
|
Service |
6.02 |
Equipment warranty period (hardware warranty and repair service) |
Yes |
|
6.03 |
Technical support provided during new product introduction |
Yes |
|
|
6.04 |
Free training time ≥ 16 hours per equipment unit |
Yes |
|
|
6.05 |
Free software upgrades available |
Yes |
|
